Technical Data

Features

6"×2" V-groove track cast iron wheel caster | 600PF-150050R-01VG

6"×2" V-groove wheel caster is designed to guide equipment by rolling on inverted angle iron track. Elevated track minimizes problems caused by floor debris. The relief groove at the base of the "V" equalizes the load on each face of the angle. When not operating on track, the considerable wheel tread on each side of the V-groove allows for use on smooth floors.Whether you’re using them for industrial purposes or on a sliding barn door, WandaTool v-groove casters are a great option in very specific situations.

Featured 6"×2" Medium heavy duty cast iorn V-groove track wheel caster

• Top Plate: Cold formed from 6mm steel plate.

• Fork Legs: 6 mm steel formed to increase strength and welded inside and outside to yoke base.

• Bearing & Axle: Standard straight roller bearing with drilled hardened steel spanner bushing and plastic side retaining thrust washers. 12.5mm diameter wheel solid axle complete with lock nut.

• Lubrication: Zerk in swivel section and wheel for easy lubrication.

• Finish: Zinc plated to resist corrosion.

Custom made 6"×2" Medium heavy duty cast iorn V-groove track wheel caster

• Yoke Base: Notched yoke base for factory or installable 4-position swivel lock available.

• Side Washers: Metal step retaining thrust washers available.

• Wheel Axle: 1/2-13 UNC hollow axle with grease fitting available.

• Finish: Electrophoresis black plated to resist corrosion available.